Every end-break on an autoconer costs a spinning mill time, splices and yarn quality. For knitting yarn, one of the simplest ways to reduce breaks is correct yarn waxing. A well-chosen spinning mill wax roll lowers friction between yarn and knitting needles, reduces fly and keeps the knitting machine running smoothly. This guide explains what to check.
Why waxing reduces yarn breakage
During winding, the yarn passes over a rotating wax roll and picks up a very thin layer of wax. This film:
- Lowers the friction of the yarn against guides and knitting needles.
- Lays down protruding fibres, so hairiness and fly are reduced.
- Gives smoother, more even unwinding from the cone on high-speed knitting machines.
Too little wax gives high friction and breaks; too much wax causes deposits on needles and stops. The goal is a uniform, controlled wax pick-up.
1. Choose the right wax grade for your yarn
| Yarn / condition | Suggested grade |
|---|---|
| Cotton, wool, rayon, acrylic & blends (general use) | WR-MI-10 Green |
| Medium & fine counts in warm mills | WR-MI-20 Yellow |
| Soft-twist or bleached yarn, low winding tension | WR-MI-30 Blue |
| Yarn that will be dyed or bleached | WR-MI-40 Pink / WR-MI-50 Lemon Yellow (water-soluble) |
| Hosiery yarn conditioned at high temperature | WR-MI-300 White |
If breaks rise in summer, the mill temperature may be softening the wax too much – a harder grade usually helps.
2. Use the correct roll size for your machine
A roll that does not sit properly in the waxing device wobbles and waxes unevenly. Common sizes are 38 × 13 × 32 mm for Murata autoconers and 38 × 15.2 × 45 mm for Schlafhorst and Savio. See our autoconer wax roll size guide for the full list.
3. Check the waxing device
- The wax roll must rotate freely – clean wax dust and fly from the spindle regularly.
- Check the yarn contact pressure; too much pressure gives heavy wax pick-up.
- Make sure the yarn path actually touches the roll on every drum.
4. Replace rolls on time
A worn-down roll changes contact and wax pick-up. Replace rolls before they become too short, and keep spare boxes of the same grade so all drums wax the same way.
5. Store wax rolls correctly
Keep boxes in a cool, dry place away from direct sun and heat. Wax rolls stored above about 35 °C can deform or sweat, which leads to uneven waxing.
Quick checklist
- Right grade for yarn type and season
- Right OD × ID × height for the machine
- Clean, freely rotating waxing device
- Even contact on every drum
- Timely replacement and cool storage
Order spinning mill wax rolls
Maruti Industries, Jamnagar manufactures autoconer and spinning mill wax rolls in all common sizes, supplied box-wise across India. Order wax rolls online, see grades and sizes, or send your machine model and yarn type on WhatsApp for a recommendation.
